Oldsmobile Intrigue P2379 Code:

OBD-II Diagnostic Powertrain (P) Trouble Code

Trouble In Oldsmobile Intrigue P2379 Possible Cause

Common causes of Oldsmobile Intrigue P2379 include four-wheel drive switch or actuator failures. Other causes include faulty sensors, solenoids, or switches, and defective wiring harnesses and connectors.

Common Symptoms For Oldsmobile Intrigue P2379

  1. A suitable OBD-II scanner (or code reader) and a digital volt/ohmmeter will be most helpful in performing a successful diagnosis
  2. Engine and transmission ground cables, straps, and wires are sometimes left dangling after repairs are performed
  3. Many scanners will permit the technician to retrieve these alpha numeric numbers (or codes) prior to controller replacement
  4. There are several tools which will be instrumental in attempting to successfully diagnose the conditions which contribute to this code being stored

Similar Problems

Fuel And Air Metering (Injector Circuit Malfunctions Only)
Cruise Control Servo Indicates Low
TFP Valve Position Switch-Drive Without Drive Ratio

Oldsmobile Intrigue P2379 Troubleshooting

Broken engine mountings can cause banging and graunching noises. There are two main types of mounting those centrally placed close to the bottom of the block and those higher up the block which mount on to the inner wings or chassis members. Oldsmobile Intrigue P2379 OBD 2 code on vehicles with electronically controlled automatic transmissions, the 3-4 shift solenoid is responsible for actuating the hydraulic circuits to activate clutches or bands that change gears inside the automatic transmission.

How to turn off Oldsmobile Intrigue P2379 check engine light ?

There are two ways to turn off the check engine light:

A repair technician can do so once repairs have been made.
The OBD II can automatically turn it off when it fails to detect the problem after several diagnostic cycles.

EngineTroubles.com Logo

Copyright © 2017 | https://www.enginetroubles.com | All Rights Reserved.