P3332 Code:

OBD-II Diagnostic Powertrain (P) Trouble Code

Possible Cause

P3332code will be stored and a malfunction indicator lamp may be illuminated. Some vehicles will require multiple failure cycles in order for the malfunction indicator lamp to be illuminated.

Common Symptoms

  1. Several tools will be instrumental in successfully diagnosing this code
  2. If either the reference voltage or ground circuits are open, use the digital volt/ohmmeter to check for continuity (disconnect all related control modules from the circuit before checking circuit resistance or controller damage may occur) and resistance in all circuits
  3. This signal is systematically forwarded to affected control modules that utilize the data to accomplish various other tasks
  4. If the code fails to immediately return, you may have an intermittent condition

Similar Problems

Fuel And Air Metering (Injector Circuit Malfunctions Only)
Crankshaft Position Sensor Circuit Performance
Cruise Control System - Vehicle Accel Too High

P3332 Troubleshooting

Broken engine mountings can cause banging and graunching noises. There are two main types of mounting those centrally placed close to the bottom of the block and those higher up the block which mount on to the inner wings or chassis members. P3332 OBD 2 code on vehicles with electronically controlled automatic transmissions, the 3-4 shift solenoid is responsible for actuating the hydraulic circuits to activate clutches or bands that change gears inside the automatic transmission.

How to turn off P3332 check engine light ?

There are two ways to turn off the check engine light:

A repair technician can do so once repairs have been made.
The OBD II can automatically turn it off when it fails to detect the problem after several diagnostic cycles.

EngineTroubles.com Logo

Copyright © 2017 | http://www.EngineTroubles.com | All Rights Reserved.