By far the most common cause of this Isuzu Frontera C0858 code is from worn or defective transmission shifter components. Other causes may include a defective range sensor, open, shorted, corroded, or otherwise damaged wiring and/or electrical connectors.
There will also be noise coming from the turning radiator fan and the belt that turn the fan blade. There are a multiple of other belt driven devices under the hood. An engine pulley is mounted to the engine of an automobile and drives all belts. Your car probably has a serpentine belt which is a continuous belt used to drive multiple peripheral devices. Isuzu Frontera C0858 the main thing to check is to verify the operation of the VCT solenoid. You're looking for a sticking or stuck VCt solenoid valve caused by contamination. Refer to vehicle specific repair manual to perform component tests for the VCT unit.
A repair technician can do so once repairs have been made.
The OBD II can automatically turn it off when it fails to detect the problem after several diagnostic cycles.
Copyright © 2017 | http://www.EngineTroubles.com | All Rights Reserved.