Dodge Dynasty P3798 code applies to vehicles equipped with dual clutch adaptive transmissions, automated manual transmissions, manual transmissions and automatic transmissions. Technicians also report the presence of excessive corrosion in the sensor connector as the cause of this code being stored.
A sure sign of this is smoke or steam being emitted from underneath the hood. The ignition timing could be set incorrectly and will require adjustment. If, when looking under the hood, you notice that the drive belts appear loose, they need to be tightened or completely replaced. If there is a noticeable pool of fluid underneath the car, this could be a sign of the cylinder head gasket failing. That will be confirmed in the form of billowing smoke being blown from the exhaust system. Dodge Dynasty P3798 OBD2 may also be triggered by faults earlier down the line. For example, a dirty MAF sensor might be causing the car to overcompensate in its fuel-trim adjustments. As a result, oxygen sensors are likely to report fuel mixture problems.
A repair technician can do so once repairs have been made.
The OBD II can automatically turn it off when it fails to detect the problem after several diagnostic cycles.
Copyright © 2017 | http://www.EngineTroubles.com | All Rights Reserved.